These are 6mm scale civilian yellow and red-zone buildings from the command and conquer universe, seen in Command and Conquer: Tiberian Sun. These buildings work well with (and were inspired by) StooPidicus's 6mm Command and Conquer models. https://www.thingiverse.com/thing:3719488
included-
Port-a-Shack
double-shack
waystation (civ building with arm)
observation tower
Rades-Roadhouse
watch tower
water purification plant
water tank
I have had success printing all except the water purification plant, and the two shacks without support. It is likely the stands for the shack will break off during printing. when I get around to it I will get the stands fixed. In the meantime, hot glue or CA glue will work for a simple repair.
My printer settings were 0% infill with .12mm layer height and brim plate adheision @ 200 degrees for hot end and 60 for bed.
GDI base pack and pictures to follow
| civ_building_with_arm.stl | 557.1KB | |
| double-shack.stl | 61.0KB | |
| observation_tower.stl | 52.0KB | |
| port-a-shack.stl | 30.6KB | |
| rades-roadhouse.stl | 267.9KB | |
| watchtower.stl | 8.1KB | |
| water_purification_plant.stl | 342.1KB | |
| water_tank.stl | 175.7KB |
