Thundercats Sword Of Omens – Mark 4? 3D Printer Model
The file 'Thundercats Sword Of Omens – Mark 4? 3D Printer Model' is (stl,3mf,FCStd,zip) file type, size is 8.7MB.
The file 'Thundercats Sword Of Omens – Mark 4? 3D Printer Model' is (stl,3mf,FCStd,zip) file type, size is 8.7MB.
"tweak" of the Sword of Omens Full power and Dagger builds. Huge props to the ones that have gone before.... I just applied my own version of OCD.
handle - broke everything apart, threaded everything. print as much as you want or either the dagger or sword segments.
cross-guard - make the eye threaded, closed off one side of the mounting holes, make a cover plate and made some other minor tweaks.
guards - split and cleaned them. holes are 2mm, so 1.75mm filament should work if you want to use something to align them.
blade... sorry, had to do some re-design the sword blade, just cleaned up the dagger.
print 4 of the middle segments, or... as many as you think you need!
everything is small enough that you could print on a printer with a 4/5/6" bed (100/125/150mm for those metrically inclined).
Added set of blade segments with holes.
| blade_base.stl | 22.5KB | |
| blade_base_holes.stl | 68.5KB | |
| blade_segment.stl | 17.5KB | |
| blade_segment_holes.stl | 62.2KB | |
| blade_tip.stl | 36.7KB | |
| blade_tip_holes.stl | 68.3KB | |
| CCR10_eye_-_Open-w-depressed-Lion.3mf | 576.2KB | |
| CCR10_eye_-_Open-w-raised-Lion.3mf | 576.2KB | |
| crossguard_center_A-_Threaded.stl | 528.2KB | |
| crossguard_center_B-_Threaded.stl | 513.6KB | |
| Crossguard_Cover.stl | 62.2KB | |
| Dagger_Blade.stl | 9.2KB | |
| Dagger_Crossguard_Quillion_split_A.stl | 91.3KB | |
| Dagger_Crossguard_Quillion_split_B.stl | 91.3KB | |
| eye_-_Blank-threaded.stl | 418.3KB | |
| eye_-_Closed-Center.stl | 681.0KB | |
| eye_-_Closed-Outer-threaded.stl | 405.1KB | |
| eye_-_Open-Lion.stl | 445.5KB | |
| eye_-_Open-Lions-eye.stl | 22.5KB | |
| eye_-_Open-Outer-threaded.stl | 483.8KB | |
| half_guard.stl | 346.1KB | |
| Handle_base.stl | 200.1KB | |
| handle_ring.FCStd | 6.8KB | |
| handle_ring_fscad.stl | 163.6KB | |
| Handle_segment.stl | 773.5KB | |
| Handle_segment_w_ring_short.stl | 808.9KB | |
| Pommel_Threaded_jeweled.stl | 1.5MB | |
| Sword_of_Thundera_blender.zip | 4.9MB |
