Thundercats Sword Of Omens (Full Power) 3D Printer Model
The file 'Thundercats Sword Of Omens (Full Power) 3D Printer Model' is (stl) file type, size is 52.1 MB.
The file 'Thundercats Sword Of Omens (Full Power) 3D Printer Model' is (stl) file type, size is 52.1 MB.
10/2/18 - ALL NEW VERSION COMMING SOON!
I reworked Juancgarcia's Sword of Omens Dagger into the full powered version. Added the blade. It was designed for a 1/4 in dowel rod to strengthen the blade. There are two options for the crossguard - halves or whole.
Any input is appreciated.
2-13: New Blade design. I know the part that goes into the guard is a bit dogey but it should work just fine with some sanding. Added full crossguard. Plug on grip A will need sanding to fit properly into B but it doesn't take much
2-23 Final version. Longer blade. I recommend adding some pennies wrapped in tape to Grip A for proper balance I used around 15 for mine
Added separate files for the blade sections and the closed version of the Eye
| blade_bottomrepaired.stl |
| Blade_mid1.stl |
| Blade_tip.stl |
| Closed_eye.stl |
| Closed_eye_dome.stl |
| crossguard.stl |
| crossguard_halves.stl |
| eye_of_thundera.stl |
| eye_of_thundera_hollow.stl |
| Grip_A.stl |
| Grip_Bc.stl |
| SoO_5in_parts.stl |
| SoO_5in_whole.stl |
| split_blade_repaired.stl |
