Thunderbird 1 Nose Cone (BT-60) 3D Printer Model
The file 'Thunderbird 1 Nose Cone (BT-60) 3D Printer Model' is (stl) file type, size is 1.9MB.
The file 'Thunderbird 1 Nose Cone (BT-60) 3D Printer Model' is (stl) file type, size is 1.9MB.
This model rocket nose cone is a remix of the nose cone pieces of the Thunderbird 1 sci-fi rocket and is designed to fit Estes BT-60 airframe tubing.
I had to scale down the size of the pieces to 81.7% of the original.
The nose pieces are taken from Gadgetmind's Thunderbird 1 model page.
https://www.thingiverse.com/thing:3331229
There are seven files you can download.
1 - Complete nose cone with shoulder
1 - Upper part of nose cone
1 - Lower part of nose cone
1 - Lower part of nose cone with shoulder
1 - Nose cone shoulder only
2 - End cap without and with 5.0mm hole in the center for adding an eye bolt
If you are not familiar with the "Thunderbirds Are Go" TV series from the 1960s, here is a video with some clips.
https://www.youtube.com/watch?v=BNhk_-v0SMs&ab_channel=TheSteelStallion
| Thunderbird_1_Nose_Cone_Combined.stl | 2.2MB | |
| Thunderbird_1_Nose_Cone_End_Cap.stl | 155.6KB | |
| Thunderbird_1_Nose_Cone_End_Cap_with_hole.stl | 163.9KB | |
| Thunderbird_1_Nose_Cone_Lower.stl | 1.7MB | |
| Thunderbird_1_Nose_Cone_Lower_No_Shoulder.stl | 1.6MB | |
| Thunderbird_1_Nose_Cone_Shoulder_Only.stl | 67.2KB | |
| Thunderbird_1_Nose_Cone_Upper.stl | 554.7KB |
