Armrest mount for the Thrustmaster Airbus Edition Joystick and Engine Quadrant. The mount is designed for deskchairs / gaming chairs with an open-ended armrest. The design is for the joystick right / engine quadrant left setup.
Slide each mount over the armrest and fix it with the two large screws from underneath. Insert the joystick / engine quadrant into the corresponding holder and fix it with the two small screws.
There are so many different types of armrests and it is next to impossible to design a universal mounting system that will fit equally well for all types of armrests. I have therefore added two additional "Top_Only" files which contain just the upper part holders. You can use these in combination with a different type of armrest mount to create your own mount.
The mounts are designed to print vertically without support. You will have to print 4 small screws and 4 large screws. I printed it with PLA on a Bambu Lab X1C.
Print and enjoy your flight.
| Joystick.stl | 576.5KB | |
| Joystick_Top_Only.stl | 123.4KB | |
| Quadrant.stl | 579.2KB | |
| Quadrant_Top_Only.stl | 129.1KB | |
| Screw_Large.stl | 326.6KB | |
| Screw_Small.stl | 166.9KB |
