Three Gyroid Sculptures 3D Printer Model
The file 'Three Gyroid Sculptures 3D Printer Model' is (stl) file type, size is 64.0MB.
The file 'Three Gyroid Sculptures 3D Printer Model' is (stl) file type, size is 64.0MB.
Three sculptures derived from the gyroid triopoly periodic minimal surface. Cube edges are one and a half unit cells with a length of approximately 90mm.
See here for video: https://youtu.be/p2jIglnMS3s
See here for stable downloads:
Gyroid Sculpture #1: https://thangs.com/mythangs/file/66609
Gyroid Sculpture #2: https://thangs.com/mythangs/file/66613
Gyroid Sculpture #3: https://thangs.com/mythangs/file/66614
Files are provided plain and with custom supports. Be aware that the custom supports may or may not be optimized for your particular printer, slicer and materials.
Gyroid Cube #1: A single gyroid surface in Voronoi pattern. Voronoi structures are approximately 3mm in diameter.
Gyroid Cube #2: Two offset gyroid surfaces, one solid, the other in Voronoi pattern. Voronoi structures are approximately 3mm in diameter. Mathematically, these are separate surfaces that weave around each other but do not touch. In this model there are small bridges hidden within the structures that connect the two surfaces together for structural purposes. If desired, the surface shells can be separated for dual colour printing.
Gyroid Cube #3: Two solid offset gyroid surfaces connected with randomly placed “wormholes.” The wormhole openings are approximately 7.5mm in diameter.
| Gyroid_Sculpture_1.stl | 8.9MB | |
| Gyroid_Sculpture_1_supports.stl | 13.4MB | |
| Gyroid_Sculpture_2.stl | 15.4MB | |
| Gyroid_Sculpture_2_supports.stl | 19.9MB | |
| Gyroid_Sculpture_3.stl | 20.4MB | |
| Gyroid_Sculpture_3_supports.stl | 23.9MB |
