Thread Carriage For Rod Wrapping 3D Printer Model
The file 'Thread Carriage For Rod Wrapping 3D Printer Model' is (stl,stp) file type, size is 2.6MB.
The file 'Thread Carriage For Rod Wrapping 3D Printer Model' is (stl,stp) file type, size is 2.6MB.
THIS IS STILL A WORK IN PROGRESS
https://www.facebook.com/customsandmodifications/posts/4306922422659419
EDIT: Printed on 6/1.. All is good. Might beef up a few parts but it will work just fine for now. This is a collaborative project and once a few rod builders use this to build rods, I will be collecting feedback and suggestions to make this project more advanced.
Use 1/4" rod for carriage, and 1/8" threaded rod with springs for the spools. Designed to use #19 single strand wire for tension bars but you can use wire coat hanger and bend circle loops on the ends.
-"Thread Spool Holder" is the complete file for the all parts of the carriage and spool holder
-"Board Ends" are optional feet ends for 90mm X 20mm boards (3/4" x 3.5" ID)
-"Thread Spool Tension Washers" are just the spool caps in case you need extra
Open source non-commercial use so please feel free to improve on this design.
| board_ends.stl | 2.3MB | |
| board_ends.stp | 792.5KB | |
| thread_spool_holder.stl | 4.4MB | |
| thread_spool_holder.stp | 617.6KB | |
| thread_spool_tension_washers.stl | 1.2MB |
