A 3D printable bobbin for storing and organizing your floss.
The thickness if modifiable with the thickness parameter in the customizer so you can play with the flexibility of the finished product.
You can also add up to two labels to the part that will print in the top left and right of the bobbin raised 0.4mm for indicating the floss number, brand, or anything else you may want. They are positioned to ensure 5 characters will fit so you can label your B5200, BLANC, and White.
If you dont want one or the other of the labels or either of them then leave their values blank and you will be able to generate an STL without them.
The provided example STL is 1mm thick with DMC on the left label and Ecru on the right label. As well as a set of blanks for testing the thickness you would like
Unfortunately I am unable to upload zips and dont want there to be 6k files on here so please look at this google drive for all DMC and ANC colors in 0.5,1,1.5,2,2.5, and 3 mm thicknesses
https://drive.google.com/drive/folders/1-UV1BshDvzGV_lskbZKq_7POPQ3GhDUx?usp=sharing
| floss_bobbin_0.5mm_Blank.stl | 64.9KB | |
| floss_bobbin_1.5mm_Blank.stl | 64.9KB | |
| floss_bobbin_1mm_Blank.stl | 64.9KB | |
| floss_bobbin_2.5mm_Blank.stl | 64.9KB | |
| floss_bobbin_2mm_Blank.stl | 64.9KB | |
| floss_bobbin_3mm_Blank.stl | 64.9KB | |
| floss_bobbin_labeled.scad | 1.2KB | |
| floss_bobbin_labeled_1mm_DMC_ECRU.stl | 565.1KB |
