Made the slits a bit thinner as the thread was coming loose on the original design.
Made the hole smaller and moved it a bit as it was too close to the edge.
v3 moved the hole a bit and made the design 0.5mm thick - and parameterised the thickness, so that it will fit one of these winders
| floss_bobbin2.scad | 488.0B | |
| floss_bobbin2.stl | 217.6KB | |
| floss_bobbin3.scad | 602.0B | |
| floss_bobbin3.stl | 221.5KB |
