Thor’s Hammer Mjolnir From MCU 3D Printer Model
The file 'Thor’s Hammer Mjolnir From MCU 3D Printer Model' is (stl) file type, size is 11.1MB.
The file 'Thor’s Hammer Mjolnir From MCU 3D Printer Model' is (stl) file type, size is 11.1MB.
Here is your chance to finally show you are more than worthy to summon Thor's hammer Mjolnir from MCU.
This model is modeled using Fusion 360 with the aim to be movie accurate in terms of size. The design is based on the hammer used in Thor: The Dark World and Avengers: Endgame.
Larger objects have been printed using a FDM printer and the smaller with a SLA printer. Parts are split into individual parts to both make this build easy to print, assemble and paint (no masking required). All parts can be prepared individually before the final assembly.
There are a few options when it comes to what parts to print. Only one option has been fully tested and that is the build seen in the pictures. This is based on option 1 (segmented handle) and cap alternative 1.
I have posted (just a few) videos on my Instagram https://www.instagram.com/makermelin/ which shows steps for the build, these are not intended to be instructional and is provided "as is".
| Alignment_peg.stl | 23.3KB | |
| Hammer_attachment_ring.stl | 478.6KB | |
| Hammer_body.stl | 127.0KB | |
| Hammer_cap_complete.stl | 5.1MB | |
| Hammer_cap_complete_without_decoration.stl | 46.8KB | |
| Hammer_cap_decoration.stl | 1.5MB | |
| Hammer_cap_split.stl | 48.0KB | |
| Hammer_disc.stl | 11.4MB | |
| Hammer_disc_no_markings.stl | 58.5KB | |
| Handle_one-piece_hollow.stl | 939.4KB | |
| Handle_one-piece_solid.stl | 863.1KB | |
| Handle_split_lower_hollow.stl | 769.3KB | |
| Handle_split_lower_solid.stl | 690.0KB | |
| Handle_split_upper_hollow.stl | 553.3KB | |
| Handle_split_upper__solid.stl | 478.4KB | |
| Mjolnir_stand.stl | 226.5KB | |
| Pipe_mount.stl | 458.9KB | |
| Pommel.stl | 5.9MB | |
| Ring.stl | 191.7KB | |
| Segment.stl | 266.4KB | |
| Segment_hammer.stl | 166.7KB | |
| Segment_pommel.stl | 195.4KB |
