Thor Ragnarok Helmet 3D Printer Model
The file 'Thor Ragnarok Helmet 3D Printer Model' is (stl,pdf) file type, size is 35.4MB.
The file 'Thor Ragnarok Helmet 3D Printer Model' is (stl,pdf) file type, size is 35.4MB.
Edit 5/29/17: I added the rotator bar to the wings that will fit this helmet. The problem is the wings will not rotate around the circle on the wings. This should only be printed if you already printed this helmet and do not want to print the newer version I uploaded. I fixed this issue with my newer helmet here:
https://www.thingiverse.com/thing:2349293
Edit 5/15/17: I printed this out at 100% and it was too small for my head. I will print this at 115% and see how it fits. I need a good way of sizing these helmets.
This is the Thor Ragnarok Helmet from the movie Thor: Ragnarok opening November 3, 2017. This was the most accurate I could get it with all the images and stuff out there.
Check the dimension sheet pdf. Units are in mm.
| Connected_Wings.stl | 10.2MB | |
| Left_Wing.stl | 6.3MB | |
| Part_10v2.stl | 1.2MB | |
| Part_11v2.stl | 1.2MB | |
| Part_12v2.stl | 2.3MB | |
| Part_13v2.stl | 746.3KB | |
| Part_14v2.stl | 1.4MB | |
| Part_15v2.stl | 1.7MB | |
| Part_16v2.stl | 2.8MB | |
| Part_17v2.stl | 2.0MB | |
| Part_18v2.stl | 1.7MB | |
| Part_19v2.stl | 2.9MB | |
| Part_1v2.stl | 1.2MB | |
| Part_20v2.stl | 2.2MB | |
| Part_2v2.stl | 1.2MB | |
| Part_3v2.stl | 1.2MB | |
| Part_4v2.stl | 1.8MB | |
| Part_5v2.stl | 1.4MB | |
| Part_6v2.stl | 733.2KB | |
| Part_7v2.stl | 2.3MB | |
| Part_8v2.stl | 1.8MB | |
| Part_9v2.stl | 1.1MB | |
| Right_Wing.stl | 6.1MB | |
| Thor_Helmet_Ragarok_v2.stl | 17.5MB | |
| Thor_Ragnarok_Battle_Helmet_Thicken_2_Drawing_v1.pdf | 859.1KB |
