Thor Hammer Mjolnir (4 Kg) 3D Printer Model
The file 'Thor Hammer Mjolnir (4 Kg) 3D Printer Model' is (stl) file type, size is 4.6MB.
The file 'Thor Hammer Mjolnir (4 Kg) 3D Printer Model' is (stl) file type, size is 4.6MB.
I wanted to create the Hammer of Thor but then with some real weight to it. So it needed a bit of a update to give it more strength.
I re-modelled the "handle_1" so a brass rod of 2cm could go through the complete length.
I also made a hole in "hammer_bodyB" so the rod could connect to the top of the hammer.
I made 4x 1cm holes through the length of the hammer. and two lips that connect the two B parts.
Then I modified the "hammer_bodyC" and "hammer_bodyD" part by connecting them together and also made 4x 1cm holes through them. 4 1cm aluminium rods will hold the hammer together. Then I cut 40 sheets of lead and glued them to the end of the hammer. Giving the total hammer 4 kg of weight.
This a remake of:
Thor Hammer Mjolnir (Easy prints) https://www.thingiverse.com/thing:2961715
And this the original:
Mjolnir https://www.thingiverse.com/thing:2254986
My hammer stand can be found here:
Thor Hammer Mjolnir Stand
https://www.thingiverse.com/thing:3070600
V2.0 updated. Aligned the 1cm holes
Please share your work in progress or/and your finished model on my Facebook group:
https://www.facebook.com/groups/882163935539046/
| hammer_cap.stl | 2.3MB | |
| hammer_ends.stl | 706.1KB | |
| handle_2.stl | 5.0MB | |
| handle_cap.stl | 1.8MB | |
| Mod_hammer_bodyB_v2.0.stl | 146.5KB | |
| Mod_hammer_bodyCD_v2.0.stl | 202.0KB | |
| Mod_handle_1.stl | 767.2KB | |
| Mod_Mjolnir-Head-bodyA.stl | 470.9KB |
