This is a custom 3D printed raspberry pi camera solution
This project uses **open-source** software to deliver a cost-effective home security solution with motion detection.
The pieces of software used in this project are highly flexible and can likely be adapted to your configuration although it may deviate from what I have outlined below.
This camera is designed to be a small security camera. Currently, it doesn't support night vision, but its something that I would like to add in the future.
It uses a RaspberryPi Zero W and a Pi Camera Module
https://www.buyapi.ca/product/raspberry-pi-zero-w/
https://www.buyapi.ca/product/raspberry-pi-zero-mini-camera-cable-38mm/
https://www.buyapi.ca/product/raspberry-pi-8mp-camera-board-v2/
It also uses a couple of neodymium magnets to hold the body to the mount.
https://www.amazon.ca/gp/product/B07KP9PDCB/
and it needs a 90° micro-usb cable in order to fit in the housing.
https://www.amazon.ca/gp/product/B001AR6MI6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
An example of a software setup can be found here:
| Thingcam_Mini_Assy_Mount_MKI.STL | 2.5MB | |
| Thingcam_Mini_Body_MKII.STL | 1.5MB | |
| Thingcam_Mini_Cam_Mount_MKI.STL | 91.3KB | |
| Thingcam_Mini_Front_MKI.STL | 1.1MB | |
| Thingcam_Mini_Mount_MKIII.STL | 5.5MB | |
| Thingcam_Mini_Plug_MKII.STL | 3.9MB | |
| Thingcam_Mini_Wall_Mount.STL | 1.6MB |
![Raspberry Pi Zero 2W Camera Arm Case [Remix] 3D Printer Model](https://res.3axis.co/fe0bd2db-a456-420f-8b3f-371c549f7997/images/24a46ff6-11d9-4a65-8faa-210d6a6cf47c_thumb.jpg)
