This is a remix of the (Thinner) iPhone 5 gear case by OleEichhorn (http://www.thingiverse.com/thing:464950) which in turn is a remix of the iPhone 5 gear case by BrandonW6 (http://www.thingiverse.com/thing:79606) which was inspired by QuentinT's iPhone 4 gear case (http://www.thingiverse.com/thing:65810).
I really enjoyed the look and thinner feel of Ole's remix, but it still was missing what I consider an important part of an iPhone case: A lip around the screen to protect it from face-down drops. I added a 1mm tall lip that protrudes 1mm over the front glass to prevent the screen from cracking should I drop the phone. I only added this lip on the straight edges of the frame so it is still possible to take the case off with ease.
All the parts are exactly same as Ole's except for the case frame. I printed this in ABS with no shrinkage problems though it was originally designed for PLA. All pins work correctly but may have to be sanded a bit to be inserted for the first time.
| 19_tooth_-_bottom_left_fixed.stl | 133.3KB | |
| 21_tooth_-_top_left_1_fixed.stl | 175.7KB | |
| 21_tooth_-_top_left_2_fixed.stl | 236.8KB | |
| 24_tooth_-_bottom_right_fixed.stl | 202.6KB | |
| 39_on_45_-_main_gear_fixed.stl | 520.4KB | |
| case_back_fixed.stl | 280.2KB | |
| Case_frame.stl | 180.3KB | |
| gear_chuck_helps_break-in_fixed.stl | 47.5KB | |
| Geneva_wheel_fixed.stl | 174.9KB | |
| pin_big_fixed.stl | 21.8KB | |
| pin_little_fixed.stl | 18.8KB | |
| pin_main_fixed.stl | 27.3KB | |
| tooth_for_geneva_fixed.stl | 134.6KB |
