Updated 10/1/24:
added installer tool,
the entrance tiles for Scooby Doo in Betrayal at Mystery Mansion
update 10/10/24
Betrayal at Baldur's Gate updated
added main tile frames for the 1x3 and 1x2
added slim tile frame tops for Baldur's Gate's tiles
what you need;
Turn print thin walls on.
requires 2x1mm magnets
you do not need to glue the magnets.
you will need to glue or solder the tile tops onto the bottoms.
update I added a magnet installer tool to make things easier
how to:
-when adding the magnets dedicate the right side to one pole and the left side to the other.
how to use the tool:
extras.
my card holders are a modified version of https://www.thingiverse.com/thing:5842900
to modify them as I did. increase the size by 102.5%. then uncheck uniform scaling and increase the Z-axis to 107.5mm.
not only will this be the correct size to fit half of the square tiles, but if stored on top of the manuals alongside of the dice tower (https://www.thingiverse.com/thing:2997857) not on top of the manuals, the cardholders will be at the same height making storage easier.
two cardholders will store all the tiles from both, the original 2nd edition and the expansion "widows walk" perfectly.
i printed https://www.thingiverse.com/thing:5422022 to hold all the tokens for the 2nd edition and widows walk. and the lid is https://www.thingiverse.com/thing:4114940 with the Y-axis increased to 116mm
counter pins https://www.thingiverse.com/thing:1582460
be sure to post your makes and send your love.
| BG2_Start.stl | 119.6KB | |
| BG3_start.stl | 112.4KB | |
| BG_Map_Tiles_top_4x.stl | 6.3KB | |
| BG_Map_Tiles_top_9x.stl | 14.1KB | |
| BG_Map_Tile_top_1x.stl | 1.6KB | |
| house_main_hall.stl | 77.9KB | |
| installer_tool_bottem.stl | 28.0KB | |
| installer_tool_top.stl | 20.7KB | |
| Map_Tiles_4x.stl | 255.2KB | |
| Map_Tiles_9x.stl | 574.2KB | |
| Map_Tiles_top_4x.stl | 6.3KB | |
| Map_Tiles_top_9x.stl | 14.1KB | |
| Map_Tile_1x.stl | 63.8KB | |
| Map_Tile_top_1x.stl | 1.6KB | |
| scooby_enter.stl | 178.5KB |
