After I remixed another led strip, i wanted to create my own design.
This one is thin as possible and you can just slide the led strip in then slide the top part in.
Currently full model is untested but i did cut off a 1 cm part for testing, files included.
Recommanded to print them first to see if your printer can print it at all!
I will print a few soon for my own printer fill length and will upload pictures then, but again i tested it with 10mm parts, please do so your self to to test if your printer can print it before wasting material!
There are 4 lengths included:
10mm (For testing if the printer can print it) !
50mm
100mm
150mm
200mm
There are also 6 connector types:
Straight open
Straight closed
Corner open
Corner closed
End open
End closed
Recommended to print the bottom parts and connectors with black so light will leak out less there, top parts can be printed in white or any other colour that you want, its thin so light will shine trough.
| Base_100mm.stl | 121.8KB | |
| Base_150mm.stl | 121.2KB | |
| Base_200mm.stl | 120.8KB | |
| Base_50mm.stl | 122.5KB | |
| Corner_closed.stl | 60.5KB | |
| Corner_open.stl | 78.5KB | |
| End_closed.stl | 32.6KB | |
| End_open.stl | 41.0KB | |
| Straight_closed.stl | 59.4KB | |
| Straight_open.stl | 70.3KB | |
| Test_Base_10mm.stl | 28.4KB | |
| Test_Top_10mm.stl | 18.3KB | |
| Top_100mm.stl | 18.5KB | |
| Top_150mm.stl | 18.6KB | |
| Top_200mm.stl | 18.5KB | |
| Top_50mm.stl | 18.6KB |
