Thermal Underwear For The Cafelat Robot 3D Printer Model
The file 'Thermal Underwear For The Cafelat Robot 3D Printer Model' is (stl) file type, size is 419.7KB.
The file 'Thermal Underwear For The Cafelat Robot 3D Printer Model' is (stl) file type, size is 419.7KB.
This is a cup to help preheat the Cafelat Robot piston if it's having trouble keeping its beans warm. Not necessary for darker roasted espresso beans, but might be needed for lighter roasted beans that may under-extract as the cold piston draws heat from the brew water.
Instructions: Fill the cup to the MAX FILL line with boiling water. Mount the cup to the Robot as you would the portafilter, rotating it to the right to lock. If your piston is particularly cold or if your beans are particularly light-roasted, you may want to dump and refresh the water after a few minutes to bring the piston temperature up higher.
Note - do not fill the cup over the MAX FILL line, as it may cause the cup to overflow when the piston displaces the water. There are slots on the side of the cup to prevent water from filling your Robot torso (and instead spilling onto your clean countertop).
| underwear_v3.stl | 1.4MB |
![Cable Chain [2020 Aluminium Profile Compatible] 3D Printer Model](https://res.3axis.co/9bc52dde-d937-4d64-b334-e0029b870cad/images/806b1643-b892-491e-90a8-f28d25a07317_thumb.jpg)
