The model is a single pair of leg mechanisms, based on The Jansen's Strandbeest design. Printed and assembled the mechanism will allow movement of all parts mimicking the movement profile of animal legs.
All of the model's parts are printed in a very simple manner and no supports or rafts are required.
Motion can be achieved manually using a lever or automatically - connecting the drive shaft to an electrical motor.
| ASSEMBLY.stl | 482.7KB | |
| ASSEMBLY.stp | 330.6KB | |
| PART_SPREAD.stl | 488.9KB | |
| PART_SPREAD.stp | 361.0KB | |
| TIGHT_FIT.stl | 84.0KB | |
| TIGHT_FIT.stp | 137.9KB |
