The Ultimate Center Finder 3D Printer Model
The file 'The Ultimate Center Finder 3D Printer Model' is (stl,scad) file type, size is 54.2KB.
The file 'The Ultimate Center Finder 3D Printer Model' is (stl,scad) file type, size is 54.2KB.
this is a fully customizable center finder for marking intersections of finding center lines.
this is customizable through customizer on Thingiverse.
----------------------note---------------------
remember to use the actual wood thickness.
a 2x4 isn't actually 2"x4"
3/4" plywood isn't actually 3/4"
the 3/4" MDF center finder is premade and only works for 3/4" MDF
----------------------note---------------------
to get rid of the intersection:
set WOODWIDTH2 to NEGATIVE -(double your wall thickness)
----------------------example--------------------------
if your wall thickness is 3, set wood width2 to -6
if your wall thickness is 2, set wood width2 to -4
if your wall thickness is 1, set wood width2 to -2
wood width is in inches
notch spacing is in inches
everything else is metric(mm)
comment or message any questions and I will happily respond
Thanks
| 34_inch_mdf_center_finder.stl | 232.4KB | |
| resizable_center.scad | 3.6KB |
