I built this model for all your castle raiding needs. Just remember you need to get inside BEFORE you roll it up to the castle wall.
This model was made entirely in TinkerCad utilizing imagery of the scale model used in the filming. It stands just over 7 inches high if printed at its current size. Please note the wheel pins are very small at this scale, but printed on my Mbot using the standard setting without a problem.
I tried to give you all the individual parts as well as groupings that make sense. Good luck and happy printing!
-King Arthur: What happens now?
-Sir Bedevere: Well, now, uh, Launcelot, Galahad, and I, uh, wait until nightfall, and then leap out of the rabbit, taking the French, uh, by surprise. Not only by surprise, but totally unarmed!
-Arthur: Who leaps out?
-Bedevere: U-- u-- uh, Launcelot, Galahad, and I. Uh, leap out of the rabbit, uh, and uh...
-Arthur: Ohh... (he and Lancelot slowly put their hands to their heads at the realization that they messed up)
-Bedevere: Oh. Um, l-- look, i-- i-- if we built this large wooden badger--
(twang of a catapult is heard from the French castle and the Trojan Rabbit comes flying towards where the knights are hiding)
-Arthur: Run away!
-Other knights: Run away! Run away! Run away! Run away! Run away! Run away! Run away!
(Trojan Rabbit lands on one of the pages)
| trojan_rabbit_full.stl | 4.0MB | |
| tr_back_wall.stl | 200.5KB | |
| tr_Ears_Cut_2.stl | 359.6KB | |
| tr_Ears_Grouping_2.stl | 386.4KB | |
| tr_floor.stl | 236.5KB | |
| tr_front_wall.stl | 184.8KB | |
| tr_head.stl | 844.8KB | |
| tr_head_Lft.stl | 428.4KB | |
| tr_head_Rt.stl | 472.5KB | |
| tr_head_with_Ears.stl | 1.2MB | |
| tr_head__Ears_Grouping.stl | 1.2MB | |
| tr_lft_side_wall.stl | 622.1KB | |
| tr_roof.stl | 508.5KB | |
| tr_rt_side_wall.stl | 634.3KB | |
| tr_wheel.stl | 84.1KB | |
| tr_wheels_with_Pins.stl | 400.1KB | |
| tr_wheel_pin.stl | 16.1KB |
