The Tenacious TWIST Scar Barrel For NERF 3D Printer Model
The file 'The Tenacious TWIST Scar Barrel For NERF 3D Printer Model' is (stl) file type, size is 707.0KB.
The file 'The Tenacious TWIST Scar Barrel For NERF 3D Printer Model' is (stl) file type, size is 707.0KB.
This is a WIP SCAR barrel attechment for your Foam flinging springer. To induce dart spin and bring up that accuracy. Inspired by Peter Runco
IT HAS NOT BEEN TESTED YET.
It has been designed to fit on the end of a stock CALIBURN barrel and anything similar.
There are 5 files available.
Tight dart fit options
1.) 1x Full SCAR barrel
2.) 1x SCAR barrel for optional different color tip
Loose dart fit options
3.) 1x Full SCAR barrel
4.) 1x SCAR barrel for optional different color tip
5.) 1x optional tip for printing a separate color (orange, etc.)
The Fin height dimensions were taken from the Hamburgular007 Homebrew SCAR
Everything else including the twist is my own unique design.
Total length of SCAR 120mm
Barrel inserts into SCAR 30mm
OD of SCAR is 38mm
TWIST IS 1/5 total rotation
AGAIN.. I HAVE NOT PRINTED OR TESTED THIS SCAR YET, I WILL UPDATE THIS POST ONCE I DO
UPDATE** 10/10/2019
made small change to NOTIP files and ORANGETIP file to make for better printing.
UPDATE** 10/13/2019
Fixed orange tip from poor render resolution. Is now an actual circle. Sorry about that
UPDATE** 10/23/2019
PER REQUEST added file for 9/16" sized brass barrel
| Brass_SCAR.stl | 318.2KB | |
| orangetip2.stl | 810.6KB | |
| scarloose.stl | 302.0KB | |
| scarloose_bodynotip.stl | 316.1KB | |
| scartight.stl | 301.8KB | |
| scartight_bodynotip.stl | 315.9KB |
