The Slim Wallet – Wexion Remix 3D Printer Model Free Download

Description Files (4)

Summary

This is my take on the Slim Wallet of Pentland designs. I wasn't totally happy with what he made so I changed it until I was! :)

The changes that I made:

The lock and the arm for the cards are now on opposite sides. This makes for a seamless one hand experience.
There is a stop in the hinge which makes it not turn further than about 60 degrees. This way you are always able to push the cards down.
There where some small inconsistencies in the thickness of the card arm which caused multiple cards to pop up on the same step. So changed that.
because this model required very tight tolerances I moved the lock pieces up so it is easier to move after printing.
I removed the hole on the bottom. I know this is used to crack the arm loose but I used a different method for that.

If you are a lefty you might want to mirror the model! :p

How do I print this?
The way this is easiest for you printer to print is to have the arm separate from the rest of the model on the build-plate.
After printing you can then insert the arm in the rest of the wallet. You might want to use a heatgun to soften the plastic a bit so it is easier to get it in.

CardWalletV2.0.stl	1.1MB
CardWalletV2.0_ArmPart.stl	76.0KB
CardWalletV2.0_WalletPart.stl	111.8KB
The_Slim_Wallet_-_Remix.3gpp	2.2MB

The Slim Wallet – Wexion Remix 3D Printer Model

Summary

Tags

You might also like