The Selki (28mm DnD Ship Remix Remix) 3D Printer Model
The file 'The Selki (28mm DnD Ship Remix Remix) 3D Printer Model' is (stl) file type, size is 107.1MB.
The file 'The Selki (28mm DnD Ship Remix Remix) 3D Printer Model' is (stl) file type, size is 107.1MB.
I've remixed this remix for a couple reasons. Primarily, the remix was not made to fit together properly, and needed a lot of post-print modification to actually be put together. This was mostly because the main deck had been totally removed, so I added it back in but retained the shortened length, so the ship is still fully modular with three decks and fits together without modification. Secondly, the remix required some pieces from the original but didn't make it clear which pieces it left out. I've added everything needed to print the entire ship here.
| Bowsprit_1.stl | 332.9KB | |
| Bowsprit_2.stl | 95.2KB | |
| Bowsprit_3.stl | 566.9KB | |
| Bridge_Stern.stl | 248.6KB | |
| Figurehead.stl | 3.2MB | |
| Gallant_Yard.stl | 16.2MB | |
| Left_Ropes.stl | 64.1MB | |
| Lower_Midship.stl | 1.0MB | |
| Lower_Prow.stl | 702.7KB | |
| Lower_Stern.stl | 532.7KB | |
| Lower_Yard.stl | 17.0MB | |
| Main_Midship.stl | 21.9MB | |
| Main_Prow.stl | 8.9MB | |
| Main_Stern.stl | 2.1MB | |
| Mast_Bottom.stl | 7.1MB | |
| Mast_Top.stl | 6.5MB | |
| Right_Ropes.stl | 64.1MB | |
| Top_Yard.stl | 15.4MB | |
| Upper_Midship.stl | 2.3MB | |
| Upper_Prow.stl | 859.6KB | |
| Upper_Stern.stl | 1.1MB | |
| Wheel.stl | 663.9KB |
