The Screwed Up 74mm Grinder 3D Printer Model
The file 'The Screwed Up 74mm Grinder 3D Printer Model' is (STL) file type, size is 5.9MB.
The file 'The Screwed Up 74mm Grinder 3D Printer Model' is (STL) file type, size is 5.9MB.
This grinder was designed and made for a couple of reasons:
Things of note
If you do not wish to use m3 threaded inserts I have included copies of the files that do not require them.
If you have created http://www.thingiverse.com/thing:2138128 you will already have a compatible Tray and Housing. I will try to continue this trend with future designs.
Required Parts
There are several combinations of parts that can be used to construct this grinder - Threaded, No Threads, m3x10 or m3x25. At minimum you must have the parts required for the Basic Config.
Maximum Overkill Config
Basic Config
You will need to print a Top, Grinding Plate, Housing and Tray. Their individual options will require the following parts to complete.
Top
Grinding Plate
Housing
Tray
No options.
| Grinding_Plate_m3x10_No_Thread.STL | 378.2KB | |
| Grinding_Plate_m3x10_Threaded.STL | 448.5KB | |
| Housing_Knurled.STL | 6.4MB | |
| Housing_Plain.STL | 36.8KB | |
| Housing_Rifled.STL | 1.3MB | |
| Top_Screwed_m3x10_No_Thread.STL | 1.5MB | |
| Top_Screwed_m3x10_Threaded.STL | 1.6MB | |
| Top_Screwed_m3x25_No_Thread.STL | 1.5MB | |
| Top_Screwed_m3x25_Threaded.STL | 1.6MB | |
| Tray.STL | 45.2KB |
