Hi!
Playing with sculptris i made this!!
I call it 'The Roadrunner', it's a guy and his monocycle.
Figure in pictures is printed at 2x scale. Also i made some test at 75% and it can print well.
I used my favourite combo of Fillamentum PLA (Vertigo grey + Iceland Blue + Gold Happens) for the figure in photos.
See Print settings section for more info.
Hope you like it.
Have fun!!!
| flame1_up.stl | 4.7MB | |
| flame2_up.stl | 4.7MB | |
| roadrunner_up.stl | 43.1MB | |
| stand_circle.stl | 7.8MB |
