The Puzzle Lock 3D Printer Model
The file 'The Puzzle Lock 3D Printer Model' is (stl) file type, size is 6.3MB.
The file 'The Puzzle Lock 3D Printer Model' is (stl) file type, size is 6.3MB.
World's first 3D printable 4 key puzzle lock Inspired by a userJinx1385 on Reddit. This intricate puzzle lock features 3 keys a key holder and the lock itself. Challenge your friends family and co-workers to this one of a kind puzzle today.
-Update 1.1-
Updated model with better tolerances and bigger clearances Also redesign the springs for better operation.
Besides for a 3D printer and filament, the only other materials required are 16 M3x8mm screws That can be easily obtained here - https://www.amazon.com/gp/product/B01M5DWCOW/ref=s9_dcacsd_dcoop_bw_c_x_17_w
Detailed photographic assembly instructions can be found here - https://imgur.com/gallery/4YKJT
For the adventurous type, you can follow the following instructions down below.
Good luck!
Step 1: Add Pin 1,Pin 2 ,Key block slide,Shackle to Main body. Then fasten Side bolt to main body with 1 M3x8mm Hex Socket Screw
Step 2: push Spring A,B and C on to assigned pins
Step 3: attach bottom bolt to main body with 1 M3x8mm Hex Socket Screw
Step 4: attach sub body two main body with 4 M3x8mm Hex Socket Screw.
Step 5: Slide lock assembly into the top cover. fasten to lock assembly with 2 M3x8mm Hex Socket Screw into the holes located on the bottom.
Step 6: Slide on the Slide cover onto the Top cover.
Step 7: Fasten bottom nut onto bottom bolt till barely hand tight
Step 8: Attach bottom nut plate to slide cover with 4 M3x8mm Hex Socket Screw
Step 9: Attach bottom cover to slide cover with 4 M3x8mm Hex Socket Screw
Step 10: Screw in Bottom bolt cap
Please visit my Patreon to keep up on all my other creations or to show some love and Become a patron. - https://www.patreon.com/EvolvingExtrusions
| Bottom_bolt.stl | 2.9MB | |
| Bottom_bolt_cap.stl | 767.1KB | |
| Bottom_cover.stl | 957.1KB | |
| Bottom_nut.stl | 765.7KB | |
| Bottom_nut_plate.stl | 238.0KB | |
| bottom_spring.stl | 76.8KB | |
| Key_1_and_2.stl | 406.3KB | |
| Key_block_slide.stl | 156.0KB | |
| Key_holder_key.stl | 418.4KB | |
| main_body.stl | 1.5MB | |
| middle_spring.stl | 130.9KB | |
| Pin_1.stl | 207.1KB | |
| Pin_2.stl | 92.8KB | |
| Shackel.stl | 340.4KB | |
| Side_bolt.stl | 1.7MB | |
| side_key.stl | 3.0MB | |
| Slide_cover.stl | 2.4MB | |
| Sub_body.stl | 146.4KB | |
| top_cover.stl | 323.9KB | |
| top_spring.stl | 130.9KB |
