The Perfect ATX Lab PSU Cabinet 3D Printer Model
The file 'The Perfect ATX Lab PSU Cabinet 3D Printer Model' is (stl) file type, size is 612.5KB.
The file 'The Perfect ATX Lab PSU Cabinet 3D Printer Model' is (stl) file type, size is 612.5KB.
I did not find a PSU cabinet of my likings, so i drew this one up in Fusion 360 my self, suiting my needs, and my printer.
Made this ATX PSU cabinet out of 3 printed parts.
You need a printer that are able to print at least 220 X 250mm. to print this.
This is printed on a Creality CR-10 pro.
When choosing print speed, and if you have a moving table, please remember that the main cabinet is over 700grams of filament that have to be moved in the end, so don't be tempted to go too fast. I printed everything at 60mms. on my cr10.
The wire diagram is one I found on google, and supplied mainly to show the colors from the ATX, and the diagram I used to navigate my self. I have used two step up converters, and not only one as shown on the diagram.
Part used for this project is as follows:
Intrument/voltmeter on top:
https://www.aliexpress.com/item/32988488113.html?spm=a2g0s.9042311.0.0.3fac4c4deCMANU
Voltmeters x3:
https://www.aliexpress.com/item/4000106421873.html?spm=a2g0s.9042311.0.0.3fac4c4deCMANU
Adjustable Automatic Step Up Step Down Power Module Boost Buck Converter Transformer 5V 12V 24V X2:
https://www.aliexpress.com/item/4000336912257.html?spm=a2g0s.9042311.0.0.3fac4c4deCMANU
ON/OFF:
https://www.aliexpress.com/item/33030632516.html?spm=a2g0s.9042311.0.0.3fac4c4deCMANU
USB charger unit:
https://www.aliexpress.com/item/4000357088014.html?spm=a2g0s.9042311.0.0.3fac4c4deCMANU
Banana Sockets x4 pair:
https://www.aliexpress.com/item/33050413310.html?spm=a2g0s.9042311.0.0.3fac4c4deCMANU
Fuse Holders (be aware there is no fuses included, 10 amph)
https://www.aliexpress.com/item/4000126701820.html?spm=a2g0s.9042311.0.0.3fac4c4deCMANU
If u have a unstable ATX, its advised to load the +5V, I did not have to do that on mine.
https://www.aliexpress.com/item/32958436867.html?spm=a2g0s.9042311.0.0.3fac4c4deCMANU
Buck Step Down Module (this one is just for modulating the fan, a bit overkill, but that is what I had laying around)
https://www.aliexpress.com/item/32825777330.html?spm=a2g0s.9042311.0.0.3fac4c4deCMANU
ATX 24 Pin Male to 24Pin Female Power Supply Extension Cable:
https://www.aliexpress.com/item/4001293212950.html?spm=a2g0o.productlist.0.0.33c121c4R7xDfi&algo_pvid=90ece457-a97a-437c-ac7d-47dbc5f85396&algo_expid=90ece457-a97a-437c-ac7d-47dbc5f85396-7&btsid=0b0a0ac216004543986536728ef076&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
The ATX PSU is from a scrapped PC..
There is also a 60X60 cooling fan in the cabinet, witch i had laying around.
M3 Copper Inserts for the cabinet and side panel M3x5x5
https://www.aliexpress.com/item/32842866575.html?spm=a2g0s.9042311.0.0.27424c4dl7yXOP
p.s.
If you like and use my work, feel free to donate, so I can have a extra beer while drawing :-)
paypal.me/tsigakis
| frontpanel.stl | 270.6KB | |
| maincabinet.stl | 2.0MB | |
| sidepanel.stl | 209.1KB |
