Made for own use but thought maybe others could use it.
Remember to flip the bases before printing!
No brim is needed!
I recommend using 75 degrees @heatbeat for the bigger pieces otherwise you might get warping!
| 25x25x3-Hole_D.stl | 8.4KB | |
| 25x25x3-Hole_N.stl | 5.9KB | |
| 25x25x3-Standard.stl | 3.8KB | |
| 25x50x3_Standard.stl | 4.0KB | |
| 30x30x3_Hole_D.stl | 7.9KB | |
| 30x30x3_Hole_N.stl | 5.9KB | |
| 30x30x3_Standard.stl | 3.8KB | |
| 30x60x3_Hole_N.stl | 7.4KB | |
| 30x60x3_Standard.stl | 3.7KB | |
| 40mm_x_40mm_x_4mm_-_Standard.stl | 203.6KB | |
| 40x60x4_Standard.stl | 303.4KB | |
| 50x50x4_Standard.stl | 315.9KB | |
| 50x75x4_Standard.stl | 440.9KB | |
| 60x100x4_Standard.stl | 828.6KB |
