The Mandalorian Rifle Belt Sling Clip 3D Printer Model
The file 'The Mandalorian Rifle Belt Sling Clip 3D Printer Model' is (stl) file type, size is 629.0KB.
The file 'The Mandalorian Rifle Belt Sling Clip 3D Printer Model' is (stl) file type, size is 629.0KB.
My take on the upper rifle belt clip. The Bandolier sling clip or The Amban phase-pulse blaster clip. Which ever or what ever you want to call it. This is it
Taken from various screenshots of the clip.
Made mine so i could include a 1x25x25 sheet metal plate into the right part that i glued the clip under the top layer of leather so that only the correct amount was showing. I used 2mm old recycled sofa leather.
The metal plate was added whilst the 2 parts were printing, so you'll have to keep an eye on it to add the plate at the right time.
Then on the left part that it detachable and clipped to the blaster rifle, i glued a 25mm flat round magnet, purchased from Amazon. Search for - Neodymium Disc Magnet 25mm diameter x 3.5mm thick 6kg Pull.
Once the two parts are magnetised together, I couldn't pull them apart in the direction the rifle would pull them, so I feel it work really well ;)
Enjoy.
| upper_strap_greeblie_set_V2.stl | 1.6MB |
