The Little Prince Boa Fridge Magnet 3D Printer Model Free Download

Description Files (3)

Summary

The Little Prince Magnet in two pieces (base and top).
A hat boa constrictor digesting an elephant with cross-section.

Main version is for 2 colours (one works too) - base, and outline.
There is a version with 3 colours (third is mostly for elephant) - as on photo.
Single extruder, 0,4mm (or 0,1-0,2mm). 0.2mm layer works well
Check in slicer when you will need to change a colour (if you want to change it)

When printing for a fridge magnet remember to first glue the magnet (or magnetic tape) to base and then check if your second magnet (or metal) will stick to it from the other side.
If it will so you can then glue it to 'top' model:

Put magnet/metal inside elephant on base model (glue outside) and then carefully attach 'top' model to it (try to line up both models) - I put magnets inside elephant's thorax, leg and earlobe
If you don't have strong enought magnet for top part you can try to lower base model in your slicer (up to -0,6mm on Zaxis) - or you can use just base model if you want, or both as separate magnets.

Video with magnets on fridge:
https://youtu.be/WFZWVZwfmBk

Edit 05 X 2019
Added an image of how to use magnetic tape.

Little Prince Tealight cover
https://cults3d.com/en/3d-model/home/little-prince-tealight-cover

JG_Little_Prince_Snake.stl	897.9KB
JG_Little_Prince_Snake_3col.stl	1.0MB
JG_Little_Prince_Snake_top.stl	271.6KB

The Little Prince Boa Fridge Magnet 3D Printer Model

Summary

Tags

You might also like