The Kitchen Sink (fishing Lure) 3D Printer Model
The file 'The Kitchen Sink (fishing Lure) 3D Printer Model' is (stl) file type, size is 75.9KB.
The file 'The Kitchen Sink (fishing Lure) 3D Printer Model' is (stl) file type, size is 75.9KB.
I have a video of assembly instructions here: https://youtu.be/PVF75UIMdGU
It also has some print suggestions.
Basically cotter pins are cut and glued into the holes at the bottom of the sink bowls and you can use a "larger" like size 4-5 snap ring for the "bill" hole to hook line to it.
I don't know if I would suggest fishing with this thing but if you do please post a video or a picture and @ me. Especially if you catch a fish that would make my year.
I printed it sitting flat with supports up to the counter top portion and supports to the faucet. It seemed to work well. I did 0.1 mm LH at 100% to get some more strength, I'm sure 0.2 mm layers would be no problem. The cotter pins are the small 1/8" standard smaller ones CA glued would work as well as long as you can get the snap ring inside the diameter.
| Kitchen_sink_lureV2.stl | 203.5KB |
