The Horadric Server 3D Printer Model
The file 'The Horadric Server 3D Printer Model' is (stl,pdf,zip) file type, size is 25.4MB.
The file 'The Horadric Server 3D Printer Model' is (stl,pdf,zip) file type, size is 25.4MB.
The Horadric Server is a mini-ITX case for your PC or server, that resembles the Horadric Cube from Diablo II.
It fits a mini-ITX motherboard, a SFX PSU (designed for 125x101x64 mm), a 120mm CPU fan (room for a heatsink of size 157x120x26 mm), 1x 3.5" drive or 2x 2.5" drives, and up to 3 60x60x25 mm case fans (4 if you don't want a drive bay).
Additional info including BOM, parts to print, and assembly instructions are included manual.pdf in the files.
Note that some of the parts are quite large (largest is 244x244mm), but I've added other split variants that can fit on smaller build plates - you can find these in split.zip.
If you like the design and want to sponsor a coffee, you can do so here: https://paypal.me/krogh158
Update 2023-07-23:
| 2.5_bay.stl | 505.9KB | |
| 3.5_bay.stl | 406.9KB | |
| frame_bottom_corner.stl | 42.4KB | |
| frame_side.stl | 976.7KB | |
| frame_top_bottom.stl | 542.4KB | |
| frame_top_corner.stl | 159.9KB | |
| itx_mount.stl | 188.0KB | |
| manual.pdf | 23.2MB | |
| panel_back.stl | 2.0MB | |
| panel_bottom.stl | 419.2KB | |
| panel_bottom_60x60fan.stl | 572.9KB | |
| panel_motherboard.stl | 361.0KB | |
| panel_side.stl | 312.2KB | |
| panel_side_60x60fan.stl | 465.9KB | |
| panel_side_drive_bay.stl | 351.3KB | |
| panel_top.stl | 386.6KB | |
| panel_top_60x60fan.stl | 540.3KB | |
| psu_rest.stl | 19.8KB | |
| sigil.stl | 104.0KB | |
| sigil_60x60fan.stl | 173.6KB | |
| split.zip | 1.2MB |
