The Hexapod 3D Printer Model
The file 'The Hexapod 3D Printer Model' is (STL) file type, size is 1.2MB.
The file 'The Hexapod 3D Printer Model' is (STL) file type, size is 1.2MB.
This agile, 3D-printed hexapod robot, built with ESP32 and Arduino, offers a range of advanced features, including:
https://www.youtube.com/watch?v=QFQOPC1Mbdo&ab_channel=RookiDroid
https://www.youtube.com/watch?v=YvXEto3tymQ&ab_channel=RookiDroid
Check my GitHub page for the instruction and the source code
Design of the Arcade Remote Controller
Adjust leg_top.stl, leg_bottom.stl and leg_side.stl to fit better with MG90S servo.
| accessory_cable_holder.STL | 88.6KB | |
| accessory_spacer_mg90s.STL | 17.1KB | |
| body_base.STL | 1.2MB | |
| body_battery.STL | 628.3KB | |
| body_front_back.STL | 165.1KB | |
| body_servo_side1.STL | 128.5KB | |
| body_servo_side2.STL | 128.9KB | |
| body_servo_top.STL | 64.3KB | |
| body_side.STL | 323.1KB | |
| body_top.STL | 587.4KB | |
| foot_bottom.STL | 120.9KB | |
| foot_ground.STL | 265.6KB | |
| foot_tip.STL | 184.8KB | |
| foot_top_mg90s.STL | 100.9KB | |
| foot_top_mg92b.STL | 100.9KB | |
| joint_bottom.STL | 112.9KB | |
| joint_cross.STL | 175.5KB | |
| joint_top_mg90s.STL | 101.7KB | |
| joint_top_mg92b.STL | 101.7KB | |
| leg_bottom.STL | 159.7KB | |
| leg_side.STL | 157.9KB | |
| leg_top.STL | 104.6KB |
