Since this page is not working properly and is causing more and more problems, please download this files here on Printables: https://www.printables.com/model/26140-the-green-stone-puzzle/files

Version 2.0 of my puzzle game. The goal of the puzzle is to stow the green stone with the other stones in the box. I have always made small improvements to this game, optimized the design, printed many different lids and kept developing it. Now I can present the second version of this game.

The first time it took me a lot of time to solve the puzzle and many asked me whether this is even possible. Yes, it is! There is a way to get all the stones in the box. If you don't succeed after a long time, I can give you a little hint on request. In times like these, you will definitely have enough time at home to solve the puzzle. ;)

The green stone can be held in the lid with a magnet. I have uploaded different versions as an .stl file, with and without magnet a test print is also available.

ATTENTION: There are two different lid sizes. A very tight one, which slips in with a well-set printer and a version with a little more space. Print the test print beforehand to see which version suits you better.
A magnet with the dimensions Ø15x2mm fits into the hole in the lid and in the green stone. To insert the magnet, insert a print pause (filament change in Prusaslicer). Attention: Depending on the printer and print bed, the magnet may stick to the hotend! Glue the magnet in place with some hot glue. Thanks to the steel sheet of the Prusa printer, the magnet sticks to the print bed and it works perfectly without glue. Pay attention to the correct polarity of the two magnets in the lid and in the stone!

I would appreciate a rating and a comment about this game. This puzzle is my favorite project.
Sorry for possible mistakes in the text, this was translated by Google translator.