The FoxTrot 3D Printer Model
The file 'The FoxTrot 3D Printer Model' is (stl) file type, size is 909.0KB.
The file 'The FoxTrot 3D Printer Model' is (stl) file type, size is 909.0KB.
While this thing totally works, it has been superseded by The Foxtrot Mk II, here: https://www.thingiverse.com/thing:5357578
A reverse engineer of the coconut clopper from trotify.com. Pretty simple mechanism. Assemble with 8mm or 5/16 bolts (whatever they sell near you) with jam nuts and washers where necessary. There is now also a choice between "trot" and "canter". Use the two-tooth eccentric wheel for trot, and the three-tooth for canter.
If you print this whole thing without first printing the test fit ring for the bolts, don't blame me if it won't spin.
| Coconut_Bottom.stl | 260.8KB | |
| Coconut_Top.stl | 346.0KB | |
| Eccentric_Idler_Canter_Mk3.stl | 996.2KB | |
| Left_Body.stl | 151.0KB | |
| Left_Tire_Wheel_Mount.stl | 50.2KB | |
| Legacy_Reflector_Mount.stl | 54.4KB | |
| Lower_Shell_Adapter.stl | 132.1KB | |
| Lower_Shell_Adapter_Wider.stl | 44.4KB | |
| Modern_Reflector_Mount.stl | 44.4KB | |
| Right_Body.stl | 151.0KB | |
| Right_Tire_Wheel_Mount.stl | 50.2KB | |
| Shaft_Test_Fit.stl | 28.2KB | |
| Tire_Wheel_Updated_Mk3.stl | 205.2KB | |
| Top_Shell_Adapter_Mk3.stl | 19.1KB | |
| Top_Shell_Mount.stl | 151.8KB | |
| Top_Shell_Mount_Mk3.stl | 141.9KB |
