The Fancy Volet Handle, 9×12 Film Cassette. 0.5mm 3D Printer Model
The file 'The Fancy Volet Handle, 9×12 Film Cassette. 0.5mm 3D Printer Model' is (stl) file type, size is 104.6KB.
The file 'The Fancy Volet Handle, 9×12 Film Cassette. 0.5mm 3D Printer Model' is (stl) file type, size is 104.6KB.
This is the Fancy Dark Slide Handle for the fantastic 9x12 film cassette by Nerovny on Thingiverse. https://www.thingiverse.com/thing:6262327.
I'm the designer of this handle only, NOT of the film cassette.
Print in PLA, use 2 colours to use as a memo for an exposed film.
You will need a plastic sheet (0.5mm) 110x157mm and a small drill (an hand drill, or dremel or similar) with a 1,8mm drill bit, if you want to do a clean job. Print the 2 parts of the handle, measure it inside the cassette and then glue the base. Glue the front in place, then drill through the plastic sheet, over the pre-made holes. Insert small pieces of filament and use a small amount of glue on them too... cut and refine.
| volet_base_0.5.stl | 115.7KB | |
| volet_upperpart_9x12.stl | 152.9KB | |
| volet_upperpart_clean.stl | 97.6KB |
