The Drunken Elephant 3D Printer Model
The file 'The Drunken Elephant 3D Printer Model' is (stl) file type, size is 13.2MB.
The file 'The Drunken Elephant 3D Printer Model' is (stl) file type, size is 13.2MB.
Hello everyone,
Don't forget to check out my other design.."3 Sleeping Deer"
https://www.thingiverse.com/thing:6362991
And now..
I'm introducing “The Drunken Elephant”. It's a bottle holder, or if you scaled down the model, you can find various uses for it.
It's only one stl file and very easy to print on any printer.
No support is needed. But it's very important to use infill with this model. 15% worked for me.
I tried to print it with FDM printer only as I don't have a resin 3d printer but I guess it will work too.
As someone mentioned in the comments. You have to upscale the model to 140% or 150% percent to suit bottles.
Other settings :
Tested with PLA and PLA+
Nozzle : 0.4
Raft or brim : No. Skirt is enough.
Infill : 15%. It's very important to use infill with this model as it can't be printed hollowed.
Layer : 0.2 or 0.12.. both work for me
Here is a short timelapse of printing “The Drunken Elephant”.. Enjoy it. Also if you have time, check out my Pennywise PC build :)
If you like my designs, buy me a coffee.. :) .. I'm releasing these models and more every month for free.. so, support me please..
https://www.buymeacoffee.com/midnight_ideas
Another cool model is coming soon.
Happy Printing.
| The_Drunken_Elephant.stl | 28.6MB |
