The Diaphragm Piston Engine 3D Printer Model
The file 'The Diaphragm Piston Engine 3D Printer Model' is (stl) file type, size is 1.6MB.
The file 'The Diaphragm Piston Engine 3D Printer Model' is (stl) file type, size is 1.6MB.
You can find a video about this here https://youtu.be/pOPL0KdLXEc
the video for the diaphragm piston body is here https://youtu.be/-gvplMQbqnA
for the separate files on the piston itself can be found here https://www.thingiverse.com/thing:6819005
you will also need a natural latex glove and some graphite
| 3mm_Spacer_x_2.stl | 25.1KB | |
| Air_Inlet_Pipe.stl | 25.1KB | |
| Base.stl | 652.0KB | |
| Connecting_Rod.stl | 68.2KB | |
| Connecting_Rod_End_Piece.stl | 12.8KB | |
| Cranksgaft_Clip_x_2.stl | 18.8KB | |
| Crankshaft.stl | 175.7KB | |
| Crankshaft_Pin.stl | 57.7KB | |
| Crankshaft_Pin_Clip.stl | 13.9KB | |
| Flywheel_x_2.stl | 151.1KB | |
| Lower_Piston_Cylinder.stl | 37.6KB | |
| Piston.stl | 116.6KB | |
| Piston_Body_Clip_x_2.stl | 25.7KB | |
| Piston_Cylinder_Head.stl | 1.7MB | |
| Timing_Gear.stl | 818.1KB | |
| Upper_Piston_Cylinder.stl | 37.6KB | |
| Vacuum_Connector.stl | 50.1KB | |
| Valve.stl | 890.7KB | |
| Valve_Washer.stl | 25.1KB | |
| Valve_Washer_Clip.stl | 13.9KB |
