The Cutaway Model Of The RGO Grenade 3D Printer Model
The file 'The Cutaway Model Of The RGO Grenade 3D Printer Model' is (stl) file type, size is 2.2MB.
The file 'The Cutaway Model Of The RGO Grenade 3D Printer Model' is (stl) file type, size is 2.2MB.
The cutaway model of the RGO grenade (defense hand grenade) consists of a body, two halves of the explosive substance model (left and right), a UDZ fuse (impact-distance fuze) (in two parts) with a trigger lever, a safety ring with a pin (an alternative is a solid safety pin).
The fuse consists of two parts, the first part is screwed into the second. Both parts are created in two versions – with right and left threads (we are talking about the thread with which they are connected). Which modification to use is up to you. If the models are glued, then the modification of the thread will not matter at all.
This educational model is close to the original grenade and made for 3D printing.
| RGO_Body_part_24.06.17.stl | 2.3MB | |
| RGO_Explosive_L.stl | 104.4KB | |
| RGO_Explosive_R.stl | 104.3KB | |
| RGO_Pin.stl | 58.8KB | |
| RGO_Ring.stl | 300.7KB | |
| RGO_Solid_safety_pin.stl | 77.9KB | |
| RGO_Trigger_lever.stl | 38.0KB | |
| RGO_UDZ_1_L.stl | 741.9KB | |
| RGO_UDZ_1_R.stl | 741.9KB | |
| RGO_UDZ_2_L.stl | 555.7KB | |
| RGO_UDZ_2_R.stl | 578.8KB |
