The Cryptomine 3D Printer Model
The file 'The Cryptomine 3D Printer Model' is (stl) file type, size is 809.0KB.
The file 'The Cryptomine 3D Printer Model' is (stl) file type, size is 809.0KB.
Original Design 2.0
Intended for my personal use in building a Cryptocurreny mining platform.
Basic spatial cognizance required for planning and execution.
All the building blocks are there for you to use.
Tube lengths from 1mm to 200mm.
Cube and Straight connenctors with spacing for customization.
Endcaps for a finished look
Stackable, Scalable, Expandable, and Reusable.
Standardized 2mm wall thickness across sections provides plenty of strength to support GPU's, even for multiple stacked tiers.
Keeping your cost lower and expandable.
Use glue to hold together or get a cheap plastic welder off of Amazon.
Tips greatly appreciated.
Motherboard base with mounting options to come!
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/b6cyVaiLLov
| connectorcap.stl | 1.4KB | |
| cryptomine.stl | 1.6MB | |
| cubeconnector.stl | 303.8KB | |
| squaretube100mm.stl | 180.0KB | |
| squaretube10mm.stl | 1.6KB | |
| squaretube120mm.stl | 180.2KB | |
| squaretube140mm.stl | 180.3KB | |
| squaretube160mm.stl | 180.2KB | |
| squaretube180mm.stl | 180.3KB | |
| squaretube1mm.stl | 1.6KB | |
| squaretube200mm.stl | 180.1KB | |
| squaretube20mm.stl | 1.6KB | |
| squaretube2mm.stl | 1.6KB | |
| squaretube30mm.stl | 1.6KB | |
| squaretube3mm.stl | 1.6KB | |
| squaretube40mm.stl | 1.6KB | |
| squaretube50mm.stl | 1.6KB | |
| squaretube5mm.stl | 1.6KB | |
| squaretube60mm.stl | 1.6KB | |
| squaretube80mm.stl | 180.0KB | |
| squaretube90mm.stl | 180.2KB | |
| straightconnector0mm.stl | 1.6KB | |
| straightconnector10mm.stl | 3.2KB | |
| straightconnector20mm.stl | 3.2KB | |
| straightconnector5mm.stl | 3.2KB | |
| tubecap.stl | 2.2KB |
