https://youtu.be/fZHvfCJavJ0
Hi all,
This is a Maze for fun game to play with a ball up to 5mm.
and also a test for a little bugs from center hole :)
(The star is to make it harder for the end of the game)

Please follow the instruction!!!!

the full size dimension is : diameter 280 X 10mm High
Need a perfect bed calibration.

instruction:

first all , place STL on SD3 slicer and down part to --> -0.2 at Z !!!

first step:
2 layer of transparency (clear like glass) filament !!!
0 high start - 0.4 and stop.
Leave a warm bed!

step 2:
change filament color(Recommend White)
Select a single(1) external wall (outline shells),
0% infill.
bottom layers 2
top layers 0
concentric pattern(Recommend)
0.4 start point - 9.4 stop
Leave a warm bed!

clear (if you have) a retraction strings waste from the maze.

step 3:
change filament color (dark one)
bottom layers 2
top layers 2
Lines pattern
9.4 start point- 9.8 stop
(if you fill 2 top layer not enough use step 4 , 9.8- 10 high)

Instructions are not easy but a nice result occupies the children and takes them out of the smartphones. Keep the bed warm throughout the process so that the part does not rise (unless you can use an adhesive spray), consider the times to replace the following G codes.

Enjoy!