The Clip-On Lens Cap Holder 3D Printer Model Free Download

Description Files (12)

Summary

UPDATE: Added models with a thicker clamp (on the back) so it should be less likely to break.

The Clip-On Lens Cap Keeper can hold ANY SIZE OF LENS CAP!

Simply slide your camera strap into the alligator teeth of the 3d printed clip, snap it closed and you're good to go! Pinch to open the clamp and insert any size lens cap!

There are multiple versions available:

Medium: This version will work for most camera and camera bag straps.
Tight: In case you have a very thin camera strap.
Large: In case you have a thick camera or camera bag strap.
CLOSED: Means that the pincher at the end (that holds the lens caps) is much closer together, these can be used to hold microfiber cloths and other things that are not as thick as a lens cap. NOTE: These "CLOSED" versions may not work for lens caps depending on what type of plastic you print with and how flexible it is! If printing in PLA, go with the regular version, not the "CLOSED" version.
Thicker Clamp: These versions just have a thicker clamp in the back so they're less likely to break - but this also means that it's more difficult to clamp (due to it being less flexible). Depends on printer and print settings. You'll have to see what works best for you.

I printed mine in Hatchbox PLA but you may also consider ABS or a stronger/more flexible PLA.

Has been tested with lens cap sizes: 20.6mm-145mm and all seem to fit well so far.

PS. Be sure to check out the new facebook group called "3D Printing Useful Things!" - where you can find lots of other useful 3D prints :)

https://www.facebook.com/groups/608845186127310/

CapKeeper_V1_Large.STL	191.3KB
CapKeeper_V1_Large_CLOSED.STL	191.3KB
CapKeeper_V1_Medium.STL	191.3KB
CapKeeper_V1_Medium_CLOSED.STL	191.3KB
CapKeeper_V1_Tight.STL	191.3KB
CapKeeper_V1_Tight_CLOSED.STL	191.3KB
LensCapClip_V1_Large_Closed_ThickerClamp.STL	195.0KB
LensCapClip_V1_Large_ThickerClamp.STL	195.0KB
LensCapClip_V1_Medium_Closed_ThickerClamp.STL	195.0KB
LensCapClip_V1_Medium_ThickerClamp.STL	195.0KB
LensCapClip_V1_Tight_Closed_ThickerClamp.STL	194.9KB
LensCapClip_V1_Tight_ThickerClamp.STL	195.0KB

The Clip-On Lens Cap Holder 3D Printer Model

Summary

Tags

You might also like