The CanClip (various Sizes) 3D Printer Model
The file 'The CanClip (various Sizes) 3D Printer Model' is (STL) file type, size is 1.7MB.
The file 'The CanClip (various Sizes) 3D Printer Model' is (STL) file type, size is 1.7MB.
KEEP YOUR HANDS WARM AND YOUR BEVERAGE COOL!
With the CanClip your beverage is always within reach.
CHECK THE SIZE OF YOUR CANS!
The CanClip is designed for 330ml (11.2 oz) cans used in the EU
that are 115mm tall and 66mm in diameter
New versions
CanClip for 375ml (12.7 oz) cans used in Australia that are 130mm tall and 66mm in diameter
And
CanClip for 500ml (16.9 oz) cans used in EU that are 168mm tall and 66mm in diameter (a.k.a. halve leo's)
If you print one of the new versions please let me know if it works properly (or not). I found the length of those cans on the internet so I'm not 100% sure.
Tips for easy use:
For commercial purposes please contact.
| CanClip_330ml_-_Original.STL | 565.7KB | |
| CanClip_330ml_-_Push_Pull.STL | 805.7KB | |
| CanClip_375ml_-_Original.STL | 792.4KB | |
| CanClip_375ml_-_Push_Pull.STL | 554.3KB | |
| CanClip_500ml_-_Original.STL | 533.4KB | |
| CanClip_500ml_-_Push_Pull.STL | 768.1KB |
