The Cable Ring
This is a print-in-place 2 part cable ring that lets you organize various power, display, usb and other types of cables. Better than zip ties and velcro straps!
Features
- The rings print in place with a 0.25mm clearance that should print well on all hobbyist printers, and can be separated by bending the rings - no tools required!
- The rings feature a dedicated space for a 12mm label used by various label makers
- Included STLs in 5 different sizes
- Prints well with simple PLA, does not require any supports
- Each ring prints in under an hour even with conservative settings
Size guide
There are 5 sizes included. The sizes indicate the inner diameter (ID) of the ring - the ring's thickness and other dimensions are constant across sizes:
- 20mm - for slim cables such as usb and other charging cables
- 25mm - for slim display and power cables, such as VGA and 2 prong power
- 30mm - for thicker display and power cables, such as HDMI, DP, and PC power supply cables
- 35mm - a more forgiving fit for thicker cables
- 40mm - for thick power cables such as extension cords
