The Black Series 1/12 Scale Articulated BD-1 Star Wars – Jedi Fallen Order 3D Printer Model
The file 'The Black Series 1/12 Scale Articulated BD-1 Star Wars – Jedi Fallen Order 3D Printer Model' is (ctb,stl) file type, size is 23.1MB.
The file 'The Black Series 1/12 Scale Articulated BD-1 Star Wars – Jedi Fallen Order 3D Printer Model' is (ctb,stl) file type, size is 23.1MB.
Intended for Resin 3d printing. The socket should sit flush inside the head it might need drilled or cleaned up inside the head hole encase it fills with some excess resin.
The Knee joints are intended to be made with some 3d printer filament though any sort of wire or rod about the same size should work.
Make Sure to check outs @Jordali 's 3.75 TVC scale version
https://www.thingiverse.com/thing:5243114
Feel free to use/modify/sell prints along as you credit me and link back to here.
Just don't sell the file.
| BD-1.ctb | 13.2MB | |
| BD1_Antenna_print_x2.stl | 321.8KB | |
| BD1_Body_v2.stl | 1.4MB | |
| BD1_Head_v2.stl | 8.0MB | |
| BD1_Left_Hip_Socket.stl | 170.9KB | |
| BD1_Left_Lower_Leg.stl | 3.3MB | |
| BD1_Left_Lower_Leg_with_wires.stl | 3.8MB | |
| BD1_Left_Upper_Leg.stl | 1.1MB | |
| BD1_Neck_Socket.stl | 170.9KB | |
| BD1_Right_Hip_Socket.stl | 170.9KB | |
| BD1_Right_Lower_Leg.stl | 3.3MB | |
| BD1_Right_Lower_Leg_with_wires.stl | 3.8MB | |
| BD1_Right_Upper_Leg.stl | 1.5MB |
