I designed this Golden Chest as a token box for The Binding Of Isaac Four Souls card game. The tokens didn't have any container and I wouldn't like to mix them in the coin bag, so I designed this. It looks more like a generic golden chest, but actually it would've been an item chest from the video game, but I suck at modelling.

There are 5 STL files, but you need only 3 or 4.
There is a version with the hinge attached or seperated and to be glued on after print.
I did mine with the seperated one, just because I wanted to avoid more supports.
So if you want the seperated hinge one, download all stls except for:
chestTopWithHinge.stl

If you want to print the top with hinge attached, obviously you take the file above, but leave out the seperated hinge and top.

The hinge is designed to fit a 1.75mm filament piece. It's actually a bit wider, so the filament piece can slide in quite easily, but it says in place too.

The top stays closed, with magnets. I hot glued a few pieces on the top and on the bottom half, seen on the picture. It's a bit janky, but it works.

If anyone wants to adjust it for a wider filament or you need to adjust the design for your clearances, feel free to do so, since I attached STEP files as well as PLASTICITY files, for the recently released new modelling app(with the same name).