These are the 3D print files of the Best all-around USB PD Powerbank, watch my video first;
https://youtu.be/tTgXwruB7vk
The complete design files are hosted on GrabCAD
https://grabcad.com/library/the-best-diy-usb-pd-power-bank-design-files-1
3D print instructions:
Print with ASA, ABS, or PETG, the IO shield, side shield, end clamp, and top LED cover can be printed using PLA
For all:
0.2mm layer height,
3 layer wall,
30% infill
| Button_cover.STL | 264.0KB | |
| DC-DC_converter_module_assembly_V2.STL | 326.9KB | |
| DC-DC_converter_module_full_assembly.STEP | 4.9MB | |
| DC-DC_converter_V2_lid.STL | 219.4KB | |
| DC-DC_voltage_adjust_knob.STL | 22.0KB | |
| dc_dc_CONVERTER_front_IO.STL | 158.4KB | |
| Powerbank_body_Lid.STL | 1.2MB | |
| Powerbank_Full_assembly_-_Battery_pack_assembly-1_Battery_locker_v2-1.STL | 30.4KB | |
| Powerbank_Full_assembly_-_Battery_pack_assembly-1_battery_pack_body-1.STL | 480.5KB | |
| Powerbank_Full_assembly_-_Battery_pack_assembly-1_Battery_pack_cap-1.STL | 210.1KB | |
| Powerbank_Full_assembly_-_IO_shield-1.STL | 115.1KB | |
| Powerbank_Full_assembly_-_Powerbank_body_end_clamp-2.STL | 64.9KB | |
| Powerbank_Full_assembly_-_Side_accent_strips-1.STL | 4.4KB | |
| Powerbank_Full_assembly_-_Side_accent_strips-2.STL | 4.4KB | |
| Powerbank_Full_assembly_-_Side_shield-1.STL | 508.2KB | |
| Powerbank_Full_assembly_V3.STEP | 29.4MB | |
| Powerbank_Main_body_base.STL | 317.9KB | |
| Powerbank_top_accent_ring.STL | 24.3KB | |
| Smart_power_bank_Script_and_descripton_1.pdf | 97.5KB | |
| Wireless_charging_and_ring_light_hausing.STL | 220.8KB |
