3D Printer Models

The Asterix – 3″ Quadcopter 3D Printer Model

Author: @Dave_C_FPV

License: CC BY-NC-ND

File formats: stl

Download type: zip

Size:396.3KB

The file 'The Asterix – 3″ Quadcopter 3D Printer Model' is (stl) file type, size is 396.3KB.

Description Files (4)

Summary

About the design

The Asterix is a shrunk down version of my 5" Inch ARS-5 design. It's made for 20x20 stacks, 13-15xx motors and 19mm micro cams.
Please note: The V1.1. needs naked bottom motors.

More details on the frame: https://www.youtube.com/watch?v=ocUgJ2YOd74&t=2s

Weight: 59g including screws and standoffs
Build weight: 178g dry and 288g AUW with a 4S 850mah R-Line

My Recommended Setup (Updated)

Motors: RCing Power 1506 or the new iFlight Xing 1408
FC + ESC:Mamba F405 Mini
CMOS Camera with big sensor: Caddx Ratel or the RunCam Phoenix
VTX: Cheap TBS Unify Nano clone from HGLRC or get the Original TBS if you're not on a tight budget
RX: FrSky XM (only of you use FrSky of course)
Props: Gemfan 3052
Standoffs: 20mm anodized (You will need to cut the cam mounts if you take those tapered ones)
Misc: XT-60 connector and M2x8 screws to mount the motors

Change Log

25.02.2019 Created
17.06.2019 Version 1.1 with new motor mounts to fit 15xx stator size motors. Please not that this version will only fit naked bottom motors. For all other the V1.0 is still online
17.06.2019 Parts list updated

Bottom_Plate_v_1.0.stl	569.8KB
Bottom_Plate_v_1.1.stl	617.7KB
Camera_Mount.stl	180.6KB
Topplate.stl	148.9KB

The Asterix – 3″ Quadcopter 3D Printer Model

Summary

About the design

My Recommended Setup (Updated)

Change Log

Tags

You might also like