The Agfa Rapid Film Recharge Project 3D Printer Model

Author: @
License: CC BY-SA
File formats: stl
Download type: zip
Size:42.1KB

The file 'The Agfa Rapid Film Recharge Project 3D Printer Model' is (stl) file type, size is 42.1KB.

Summary

This project started when dusting my old Agfa Rapid Camera and Beirette K cameras. They can use ordinary 35mm film but only when used in special Rapid/SL/Karat cartridges. The are not comon anymore but sold online for too much money.

The Cartridge is printed in place, no gluing necessary. After printing the first one I suggest braking it apart to check the bridging. You should stick a smal piece of black felt on the angled side of the opening, so that the film can just go through smooth.

The box is for fast loading a Rapid/SL/Karat cassette from a regular 135 film cassette. Stick one layer of black felt on the inside of the cover, plus a smal piece extra right between where the gears agoing to be.
The axis of the gear is made square to fit but should finally get round when I thought it through further. Use tiny frops of superglue to fit the pieces together.

1.7_AGFA_RAPID_35mm_Cassette_cone1.stl 65.1KB
BOX_Rapid-Flusher2.stl 59.4KB
COVER_Rapid_Flusher2.stl 3.4KB
GEAR_SET_Rapid_Flusher.stl 63.9KB