I made this in response to watching Optimum Techs video and thinking that he left a lot of air in it. So I made a smaller one not better but smaller and I did it with ~3.1L in size. It was designed to hold a 4060 LP, 65w CPU, HDPlex 500w PSU, and mITX motherboard. It also can only fit about a ~30mm cooler like the https://www.newegg.com/p/13C-004P-000Y1 that is 27mm tall and should be able to cool any 65w CPU unfortunately this cooler only supports intel CPUs so you will have to use a different one for AMD CPUs. I can't test it so I'm coming to all of you to test it for me pls and if you make it tell me everything you had trouble with and any suggestions. Also don't forget to post your make maybe we will get Optimum tech to see this case.
Materials:
mITX motherboard
about 30mm cooler
short PCIE riser
GaN 500w PSU from HDPlex
65w or less CPU
Most ram should fit but. just to be safe choose a ram like rip jaws or one without a heat spreader
M.2 SSD there's almost definitely no room for a sata SSD or a hard drive
Also some screws 4 for the motherboard (just use motherboard screws you would get with a case or button m3 screw probably), 4 for the PSU I think I used the m2.5 screw holes
2 screws for the GPU same screws as the Motherboard. and 2 m2 or m3 screws for the side panel.
Pls understand that this is an experimental PC case an I'm open to any suggestions you guys have I'm also open to remixes. I also understand it is not the "smallest" but, it is the the best build able one for the size that I know of for example there is one I saw on reddit but it only had the 250w PSU version and a weaker GPU which is smaller that the 500w version. Also the other one was 2.97L only .1 smaller.
Btw would not use for a motherboard with a built in io shield and io shields should fit but, I don't know for sure. Also make sure to share and maybe follow me I might release more things who knows.